Home>>Industry-tyre-FAQ
 Categories
 Informations
 Reviews
Reviewer:  
Guojing
8/1/2010 11:40:18 PM
Silicone products are exported to your

Reviewer:  
Yaxuan
8/1/2010 11:39:43 PM
We can consider the issue of cooperation under the

Reviewer:  
Yilin
8/1/2010 11:39:11 PM
I believe that you, like your product quality

Reviewer:  
Jinsha
8/1/2010 11:38:12 PM
How often do you update a product

Reviewer:  
Wangfei
8/1/2010 11:37:17 PM
Your site no membership

Reviewer:  
Peini
8/1/2010 11:35:57 PM
Direct contact with the silica gel will not risk

Industry-tyre-FAQ
2010-06-23 20:19:04     From:

Both buffered silica gel and saturated salt solutions can be used to regulate relative humidity in display cases, but these two methods for climate control work on entirely different principles.
Detail>>

2010-06-23 21:06:17     From:

Transparent silica gel–polymer composites have been prepared by the impregnation of porous gels with organic monomer and polymerization in situ. The relative amount of each phase was adjusted by varying the porosity of the silica
Detail>>

2010-06-23 21:26:49     From:

A few weeks ago I found a packet of silica gel in a pair of shoes. It said on the pack “Silica Gel - THROW AWAY” That’s not much good for a family on a mission to put nothing into landfill this year!
Detail>>

2010-06-23 21:32:09     From:

The reactions between tritium gas and organic substrates sorbed on irradiated silica gel have been studied. It has been found that tritium gas, when admitted to gamma-irradiated silica gel, is adsorbed on radiation-induced sites on the solid and
Detail>>

2010-06-23 23:28:12     From:

This is separation of solutes based on interactions between the solute and fixed active sites on the stationary phase. The active sites of the stationary phase interact with the functional groups of the compounds to be separated by
Detail>>

2010-06-29 18:41:06     From:

K - desiccant was moisture absorption rate relationship coefficient [K = Kb / Ka Ka for the thin air of silica gel in the temperature of 25 ℃, relative humidity of 60% of the water 30%, Kb for other drying agent (such as zeolite, alumina , activated clay
Detail>>

2010-07-01 18:51:24     From:

This situation occurs because the front of the model of an animal species (product model) does not lead to have a reasonable deal, so in the shape of the mold species before processing, such as mold species of the dry surface is rough or in a
Detail>>

2010-07-13 23:09:01     From:

Methyl silicone rubber, methyl silicone rubber silicone rubber for the common old varieties with water, ozone resistance, arc resistance, corona resistance and resistance to weather and aging. It can be -65 ℃ ~ 200 ℃ temperature range.
Detail>>

2010-07-20 19:57:46     From:

In general, finishing on the handle of the requirements can be summarized as soft, smooth and elastic (fullness) in three aspects. The triangle next diagram can be found in the best feel of any fabric.
Detail>>

2010-07-27 22:16:43     From:

Is generally believed that the choice of silicone rubber curing system is very limited. However, the silicone rubber vulcanization patent to it. Most of the patents involved in room temperature curing. Require the use of such curing with a layer of
Detail>>

Home | Products | News | Contact us | About us | FAQ
All right Reserved ©2010 Truck Tyre
link: