truck tyre truck tyre wear and the ground is mainly generated by friction between the slide caused. Auto start, turning and braking changing driving conditions, turning too fast, started too fast, braking too fast, truck tyre wear to fast. In addition, truck tyre wear is also related to vehicle speed, the faster speed, truck tyre wear more serious. The quality of road surface directly affects the truck tyre friction with the ground, when the road is poor, truck tyre with the ground sliding increased, truck tyre wear faster. Above produced truck tyre wear is basically uniform, is normal wear and tear. If the truck tyre or wheel alignment used improperly allowed, will result in failure of the abnormal wear and tear:
1, truck tyre wear of the central part of the early
Mainly due to excessive inflation. Properly inflated to improve the amount of truck tyre, truck tyre can reduce rolling resistance, saving fuel. However, excessive inflation, not only affect the damping performance of truck tyre, but also to excessive deformation of truck tyre, the contact area with the ground decreases, the normal wear and tear can only be borne by the central part of the tread, the formation of early wear and tear. If you use a narrow rim width truck tyre, can also cause the central part of early wear and tear.
2, truck tyre wear too much on both sides
Mainly due to insufficient inflation or long-term overload traffic. Inflated when small or heavy load, truck tyre contact with the ground surface, causing the truck tyre contact with the ground on both sides of the formation of early wear to work.
3, truck tyre on the side of excessive wear and tear
Mainly due to inaccurate positioning the front wheels. The current round of the camber is too large, truck tyre outside of the formation of early wear and tear, the camber is too small or no time, truck tyre inner side of the formation of early wear and tear.
4, truck tyre tread wear appears jagged
Mainly due to improper wheel alignment or front suspension system to adjust the location disorders, ball Songkuang, so that the normal occurrence of sliding or rolling wheels wheel alignment moving truck tyre changing and the formation of jagged wear.
5, individual large truck tyre wear
Individual wheel suspension system disorders, Bending or individual wheel bearing will cause imbalance in the early individual truck tyre wear. After this occurs, check the positioning of the wheel wear serious situation, independent suspension springs and shock absorbers of the work, while the wheels transposition period should be shortened.
6, truck tyre wear occurs form of alopecia areata
Individual parts in the truck tyre of severe alopecia areata occurs because the truck tyre wear and poor balance. When the balance wheel of high-speed rotation, the individual parts by the force, wear accelerated, while not allowed to turn and manipulate the performance worse. If found driving a truck tyre in a direction of a slight jitter rate, the wheel should be balanced, to prevent any form of alopecia areata wear.