he wheel position (front drive or rear drive) and the steering wheel and other factors, Truck tyre wear is not the same front and rear wheels, so to get the best Truck tyre wear conditions and longer life, Truck tyre transfer bit is necessary.
Tune-bit auto manufacturers need to refer to the manual transfer position on Truck tyre guidance. If the vehicle owner's manual no instructions should be classified discussion. For the installation of the four new non-directional pattern of the same size or asymmetric patterns Truck tyre of the front-wheel drive vehicles, the first transfer level should be used Truck tyre when ten thousand kilometers. The purpose of the first transfer position is to avoid uneven wear on front and rear wheel wear or balance, press the tune before and after the cross-way place.
For the installation of the four new non-directional pattern of the same size or asymmetric patterns Truck tyre of the rear-wheel drive or four-wheel drive car is concerned, the first transfer bit should be used in the Truck tyre when ten thousand kilometers. Please adjust position before and after the cross-way.
As for the installation of the four specifications of the new direction the same pattern Truck tyre of the vehicle (whether precursors, four-wheel drive or rear wheel drive vehicles), per 8000 to 10,000 km, it should be carefully observed that fetal side of the wheel shown in the forward direction of rotation arrow, adjust bit to ensure the correct direction of rotation Truck tyre. Usually the pressure before and after the Truck tyre is different, after the transposition the location should be adjusted Truck tyre pressure.