Truck tyre puncture repair tool can be used to repair specific; generally do not have the repair garage, the conditions can be cold glue yourself to the cold fill. Cold-fill method is:
1. "Remove the wheel, Paxia Truck tyre, Pa tire is best to use bamboo, pry one side, the tire pressure to the middle on both sides to try to gently Paxia, careful not to break the edge of the two tires.
2. To clean up after the break at the foreign body in the womb to play around with sandpaper to break Mao "painted cold patch glue (which can put some more; but only painted once) to be 5 - 7 minutes, fill with chunks of cold posted by cold-fill method of film in the womb can be. If the higher speed models can be cold patch into a double, to improve repair strength, and in the fetal position inside the glue of the same size symmetric two cold patch, in order to maintain wheel balance .
3. Fitted with tires, the case of artificial cheer, began to be fierce, and strive to quickly charge from both sides of the tire and sealed, fitted with valve Zhenda currently scheduled to air pressure, tighten the valve needle. Finally, pick up check, if not leak to install and use.